Aluminum Siding Walls And Its Material Characteristics
Aluminum siding profiled panels are used for covering walls and may be measured according to conventional specifications. For this reason, an approval by the construction authority is not required. Other features of aluminum include:
Weather and corrosion resistant
High heat reflection capacity
These excellent material characteristics combined with the proven profile shapes have successfully been utilized for years in Aluminum siding wall products. The siding profiled panels are continuously manufactured and cut after the roll forming process according to customer specification. For structural reasons, panels should not be longer than 6,000 mm. Aluminum siding profiled panels are primarily suitable for covering walls. They can be installed both vertically and horizontally. Thermal expansion due to temperature differences and weather conditions may affect the aesthetics of a wall. For this reason, measures are necessary to anticipate thermal expansion. In most cases, this can be provided by either a relatively flexible support or a bigger drilling hole so thermal stresses are avoided. Secure and nail loose boards. Remove down spouts, lighting fixtures, moldings, old caulking around windows and doors. Establish a chalk line in relation to the windows and eave after determining the lowest corner of the house. Splicing is necessary when the corner post does not reach the desired height. Install siding panels working from the outside corner or the termination point on the wall toward the center of the wall. This will make seam less apparent from door opening which tend to be a focal point of visual concern. Aluminum siding nails should be used to install you new siding components.